We use cookies to provide core website functionality, to analyse our traffic and to personalise content and ads. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services.
Please Note we are currently Out of Stock of our Rust Accelorator
PROTOCOL
• Remove the grease from the surface using the degreaser above if it has been cold rolled
• Sand the surface if it has been hot rolled
• Shake the product well making sure there is no deposit left at the base, before applying the accelerator, the surface must be perfectly dry
• Spread the product with a roller and dip it in the accelerator
• The layer of accelerator must cover the surface evenly, and not leave drops. If this is not the case, the grease is not adequately removed and you have not pushed hard enough with the roller
• After 30 minutes, the surface will start to turn blue,oxidation begins, if some areas are not blue it is because there has not been enough of a coating
• After 2 hours, apply water or another layer of accelerator if required, humidity and a temperature above 15°C favors the oxidation of Corten steel.
• The product is acid free, it only oxidizes the surface and will not go any deeper. It does not require any other product such as a stabilizer to stop corrosion
• The corrosion of the surface will continue for 2 weeks, the orange hue of the rust will darken from day to day to achieve a darker shade that is characteristic of permanent rust.
• As an added option, to limit the risk of dripping on the floor, you can use a varnish
• If the metal is in permanent contact with humidity (fountains, plant boxes inside...), it is essential to use a varnish so that the Corten steel does not decompose.
If you’re not sure what you need,
then we’re just a call away
